[Main Help]

Wiz Wah

Wah pedal

Parameters:

Enable

Touching anywhere on the pedal toggles its Enable state. When Enabled, there is always highly audible filtering for all Wah settings. When not Enabled, the wah pedal is bypassed for a flat response.
Range: Off/On (default Off).

Wah

Wah "pedal position": 0 means rocked all the way back for the darkest "w" sound, while 1 means rocked fully forward for the brightest "ah" sound.
Range: 0 to 1 (default 0).

Wah > Expert > Smoothing

The Wah Smoothing parameter in the Expert Menu sets the T60 for the Wah pedal-position changes. The default is no smoothing (T60=0) so that the response is immediate.
Range: 0.001 to 10 sec (default 0.15661).