GeoFrenchHornBb
GeoSWAM physical model of a French horn in Bb.
For general help on GeoSWAM instruments click here.
Parameters:
Coarse Tune
Transposition in semitones.
Range: -12 to 12 semitones (default 0).
Expression
Expression, the main dynamic-level control. Note that from MIDI, Expression can only be mapped to Channel Pressure (Mono Aftertouch, NOT poly Aftertouch).
Range: 0 to 1 (default 0.5).
Fine Tune
Fine tuning in cents; ±100 cents = ±1 semitone.
Range: -100 to 100 cents (default 0).
Flutter
Tongue flutter when the instrument is excited.
Range: 0 to 1 (default 0).
Flutter Enable
Enable/disable flutter tongue.
Range: Off/On (default On).
Growl
Growl when the reed is excited.
Range: 0 to 1 (default 0).
Growl Enable
Enable/disable Growl.
Range: Off/On (default On).
Low V Porta Enable
Enable/disable Portamento.
Range: Off/On (default Off).
Low V Porta Threshold
The velocity (0 to 1 of full) below which a legato note glides when Low V Porta Enable is on. The model’s own ceiling is 0.4 (about velocity 50): softer notes glide, and the softer the longer. 0.4 keeps that; 0.6 makes notes up to about velocity 75 glide; lower values glide fewer notes. Above the threshold a note never glides.
Range: 0 to 1 (default 0.5).
Mutes
Brass mute selection: 0 = open (no mute); higher values select the model’s mute types.
Range: 0 to 4 (default 0).
Pan
Stereo pan position: 0 = hard left, 0.5 = center, 1 = hard right.
Range: 0 to 1 (default 0.5).
Portamento
Portamento between low velocity legato notes.
Range: 1.4 to 4 (default 2.4).
Smooth Glide
Smooth glide between notes (pipe gesture).
Range: Off/On (default On).
Valve Transition Speed
Speed of the valve transition between notes.
Range: 22 to 46 (default 46).
Velocity Override
Control to override velocity so that velocity can be assigned to a slider/MIDI CC.
Range: 0 to 1 (default 1).
Velocity Override Enable
Enable/disable Velocity Override.
Range: Off/On (default Off).
Vibrato Amount
Amount of vibrato.
Range: 0 to 1 (default 0).
Vibrato Rate
Rate (speed) of the vibrato.
Range: 4 to 8 (default 5.2).
Volume
Output volume of the model.
Range: -100 to 0 (default 0).